SG Security Communications MLR2-E Manual de usuario descargar pdf (Pagina 53)

Form Number.: 7-3005 File Name: SG Automation Output Revision/Date: 01/May 3, 2005

Department: Engineering

Division: Embedded Software Form Template Owner: Jeff Cougler

6.0 Detailed Description of Com Outputs

6.1 SG outputs (TCP/IP and RS232)

6.1.1 RS-232 Configuration

The serial ports are RS-232 communications ports that are used to send alarm events to a computer running automation

software. The user can configure the port settings

Baud Rate: 1200, 2400, 4800, 9600, 19200 and 38400.

Data Bits: 7, 8 or 9

Parity: No Parity, Odd Parity or Even Parity.

Stop Bits: 2

NOTE: If 7 data bits are configured, the data will be limited to ASCII.

6.2 TCP/IP Sockets and Ports

TCP/IP ports are available only on the System II, System III and MLR2000 receivers. Each CPM has a user selectable IP

address (which is applied on the next reboot) and Port base address. By default the CPM2000 will use IP address 10.0.7.100

on the primary and 10.0.7.101 on the secondary. The default the CPM3 is also 10.0.7.100.

Base Port # Port Name

1025 SG-Automation Port

1026 UCS-Automation Port (MLR2000 only)

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 59

Sin comentarios

SG Security Communications MLR2-E Manual de usuario Pagina 53